Hoover H-PURIFIER 300 HHP30C011 Manual De Usuario página 8

GB
4. MAINTAINING YOUR H-PURIFIER
4.1 FILTER MAINTENANCE
Your H-Purifier will monitor the condition of your filter. The FILTER CLEANING button or FILTER REPLACEMENT button will turn yellow when
action is required to clean or change the filter.
Cleaning / Replacing the Filter: [Fig. 13]
• Remove the Air Inlet Cover from your product. [Fig. 13a]
• Unlock the Filter Release Switch. [Fig. 13b]
• Remove the Filter from your product. [Fig. 13c]
• Use a Vacuum Cleaner to clean the external layer of the Filter or Replace with a NEW filter. [Fig. 13d]
• Refit the Filter into the product. [Fig. 13e]
• Lock the Filter Release Switch. [Fig. 13f]
• Refit the Air Inlet Cover to your product. [Fig. 13g]
• Plug in your appliance to the power supply and switch on.
• Press the FILTER CLEANING button or FILTER REPLACEMENT button to reset the Cleaning/ Replacing alert by holding the button for 3 secs,
an audible alert will be heard to indicate a successful reset. [Fig. 11,12]
Fig. 13
5. STORAGE OF YOUR H-PURIFIER
1. Switch off the H-Purifier and unplug the power cord.
2. Clean all the internal and external surfaces of the H-Purifier and the external layer of the Filter.
3. Ensure all components are dry.
4. Remove the Air Inlet Cover [Fig. 14a], tidy up the power cord, fit it into the Storage Hook and fit the plug into the Transportation Location.
[Fig. 14c,d] Refit the Air Inlet Cover [Fig. 14e]
5. Store the H-Purifier in a cool dry place.
Fig. 14
6. ALERTS & SOLUTIONS
The following codes may appear during use. [Fig. 15]
Fig. 15
Alert on product
FILTER CLEANING
button turns yellow
FILTER REPLACEMENT
button turns yellow
8
Alert
Alert in APP
Pre-Filter cleaning Suggest to clean the external layer of the
Alert Filter.
Filter replacement
Suggest to replace the Filter.
Alert
Alert Description Solution
1. Clean the external layer of the Filter.
2. Reset the alert by holding the FILTER
CLEANING button for 3 secs.
Refer to 4.1 FILTER MAINTENANCE
1. Replace the Filter.
2. Reset the alert by holding the FILTER
REPLACEMENT Button for 3 secs.
Refer to 4.1 FILTER MAINTENANCE