Hoover H-PURIFIER 300 HHP30C011 Manual De Usuario página 5

1.1 MULTI SENSOR SYSTEM
Thanks to the Multi Sensor System your product will continuously monitor the indoor air condition in terms of PM10, PM2.5 and Volatile Organic
Compounds (GAS).
Each time you switch your product on, the Multi Sensor System will start analyzing the indoor air quality and the Air Quality LED Ring will
illuminate with different colors representing real time air quality conditions.
Air Quality LED Indoor Air
Ring Color Quality
GREEN Excellent
YELLOW Satisfactory
ORANGE Poor
RED Very poor
* In Pollen Allergy mode, PM 10 values that trigger the air quality level will be lower
to minimize the risk for allergic people.
1.2 CARBON MONOXIDE (CO) ALERT
H-Purifier is equipped with an alert system that will constantly monitor the indoor air for Carbon Monoxide (CO).
When the Carbon Monoxide alarm is activated, the AIR Quality LED Ring and the CO Alert button will flash red simultaniously and an audible
alarm will sound. The alarm will remain in operation until the Carbon Monoxide (CO) concentration has reduced to below 50 ppm unless silenced
manually by pressing the CO Alert Button for 3 seconds.
The CO Alert LED shows the working condition of the CO sensor. It appears in green color when the CO sensor is in normal condition, in yellow
color when the sensor is malfunctioning or exceeds its working life and in red color when CO alert is activated.
You can test if the alarm is working properly by pressing the CO Alert Button for 3 seconds, a loud buzzer sound will last for 5 seconds if the alarm
works properly.
2. PREPARING YOUR H-PURIFIER
2.1 INSTALL THE FILTER [Fig. 1]
Before using your H-Purifier product you will need to remove the Filter from its protective packaging:
• Remove the Air Inlet Cover from your product, grip the two Air Inlet Cover Handles and pull from the product. [Fig. 1a]
• Remove the plug from the Transportation Location and release the cord from the Storage Hook. [Fig. 1b,c]
Unlock the Filter Release Switch. [Fig. 1d]
•
Remove the Filter from your product and remove the outer packaging. [Fig. 1e,f]
•
Refit the Filter into your product. [Fig. 1g]
•
Lock the Filter Release Switch. [Fig. 1h]
•
Refit the Air Inlet Cover to your product. [Fig. 1i]
•
Fig. 1
PM 10 value* PM 2.5 value
μg/m³ μg/m³
0-50 0-25
50-80 25-50
80-160 50-100
≥ 160 ≥ 100
12 Air Quality LED Ring
13 Power Button
14 Child Lock Button
15 Sleep Mode Button
16 Filter Cleaning Button
17 Pollen Allergy Circle Lamp
18 Pollen Allergy Lamp
19 CO Alert Button & LED
20 Filter Replacement Button
21 Max Mode Button
22 Auto Mode Button
23 Light Control Button
24 Wi-Fi Button
Air Quality
GAS VOC
LED Ring
Level
L1
L2
L3
L4
GB
CO Alert Button
CO Alert LED
5