Acetech iTracer Unit Manual De Instrucciones página 28

Function Setting
Flash Control
Turn on or turn off the
illuminating function
of iTracer Unit.
Set Value:ON or OFF
Default:ON
Multiple-Round
Brust
Set the parameter of
multiple-round burst.
Set Value:1~20
Default:3
Count
Set the initial value of
"Count Down" mode.
Set Value:5~9999
Default:300
1.Press data knob
enter the interface of
"Flash Control" function.
(Figure-1)
2.Rotate data knob
clockwise/counterclockwise:
To turn ON / OFF
illuminating function.
3.Press data knob
Screen flickers and then the setting is completed.
(
1.Press data knob
enter the interface of
" Multiple-Round Brust"
function.
(Figure-3)
2.Rotate data knob
clockwise/counterclockwise:
To adjust the parameter
( 1~20) of multiple-round burst.
(Figure-4)
3.Press data knob
Screen flickers and then the setting is completed.
(
1.Press data knob
enter the interface of
" Count" function.
(Figure-5)
2.Rotate data knob
clockwise/counterclockwise:
To adjust the initial value
of "Count Down" mode.
(Figure-6)
3.Press data knob
Screen flickers and then the setting is completed.
(
Introduction
to
Flash Control
Figure-1
(
ON
Figure-2)
(
(Figure-2)
:Confirm.
to
Multiple-Round
Brust
Figure-3
(
20
Figure-4
(
:Confirm.
to
Count
Figure-5
(
0000
Figure-6
(
:Confirm.
)
EN
)
)
)
)
)
)
)
27
EN