Sz-Stl2 - Optika Italy SZ Serie Manual De Instrucciones

9.13.2 SZ-STL2

Moving the horizontal arm
1. Unlock the knob on the left side of the horizontal arm ①. (Fig.
62)
2. The arm can be extended or shortened according to specific
needs. (Fig. 63)
Tilting the head holder
1. Loosen the knob ② (Fig. 64) on the right side of the head
holder. The tilting pillar can be moved. Once the desired
angle is achieved, tighten the knob again.
Swivel the head
1. Unlock the fixing knob ③ and rotate the head to the desired
swivel angle (left or right), then tighten the knob again. (Fig.
65-66)
①
Page 43
②
③
F ig. 62 F ig. 62
F ig. 63 F ig. 63
F ig. 64 F ig. 64
F ig. 65 F ig. 65