Taurus 997150A Manual De Instrucciones página 5

5. Troubleshooting table.
Problem
"ADD WATER" indicator is on. Lack of Water.
"ICE FULL" indicator is on.
Ice cubes stick together.
Ice making cycle is normal
but no ice formed.
997150_IM.indd 5
Possible Cause Suggested Solutions
Stop the ice maker, fill water, and press
"ON/OFF" button again to restart the
unit.
Ice is full in basket.
Remove ice from ice basket.
Continuous press "Select" button 5
seconds, the unit could make ice 10
cycles even "Ice" indicator is on.
The ice making cycle
Stop the ice maker, and restart it when
is too long.
the ice blocks melt. Select the small
size ice cube selection.
Water temperature in
Replace the water. Temperature of
inner tank is too low.
water recommended at 8-32°C.
Room temperature The room temperature should be
or water temperature 10-43°C, water temperature should be
in inner tank is too 8-32°C.
high.
Refrigerant in cooling Verify by a qualified technician.
system leaks.
Pipe in the cooling
Verify by a qualified technician.
system is blocked.
2018/01/15 11:14:02 AM