Maintenance And Cleaning - UFESA PV1110C EXPERT Manual De Instrucciones

MAINTENANCE AND CLEANING

frequent use of the device is made
Do not use abrasive cleaners.
To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these
the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate,
simply wipe with soft damp cloth and wipe dry.
Fill the half of the water reservoir.
Set the temperature control to its maximum position.
Place the iron in a horizontal position over a sink. Select the level with the steam regulator. Slight-
ly shake the iron back and forth. Hot water and steam with impurities will come out of the holes in the
soleplate.
When the tank is empty, release the steam regulator and set it to position "0". Reconnect the iron to
evaporate the remaining water.
Unplug the iron and move it over a preferably old piece of cloth. This ensures that the soleplate is dry
when storing the appliance.
A special resin filter inside the water reservoir softens the water and prevents scale build-up in the plate.
Please note:
Do not use chemical additives, scented substances or decalcifies. Failure to comply with the above-
19