Tabla de contenido
3
Installation
2.2
Intended use
This product may only be used indoors in a domestic situation. It is intended to detect the presence of
carbon monoxide (CO) at the sensor. Any other use is considered inappropriate. Any damage that may
result from misuse is excluded from liability.
2.3
Battery
Long-life lithium battery (3V) sealed for the life of the product. No replacement is necessary.
When the low battery voltage warning occurs, a CO alarm signal is produced from four minutes to
30 days. Replace the device as soon as the product enters in this status.
2.4
Alarm conditions
Audible indicators:
•
30 ppm: without alarm before 120 minutes
•
50 ppm: alarm between 60 to 90 minutes
•
100 ppm: alarm between 10 to 40 minutes
•
300 ppm: alarm within 3 minutes
•
Continuous sound: CO alarm
2.5
Materials, vapours, gases
The following substances can affect the product reliability: silicone, vapours, dew condensation,
hydrogen sulphide, sulphuric acid gas, dust, oil mist, cleaning fluids, polishes, paints and cooking
operations.
3
Installation
When selecting the mounting position and before drilling the mounting holes:
▶ Ensure that no electrical cables or other supply lines can be damaged
6
CO-M – 6721849104 (2022/02)
Tabla de contenido
