Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
1- To activate the Lock function;
SHIFT/SET
Press
2 - To deactivate the Lock function;
SHIFT/SET
Press
3.0 Rechargeable Battery Care and Maintenance
The rechargeable battery in your tool will last far longer when maintained properly.
When the charge on the battery is getting low, a battery symbol will be visible on the
middle left side of the display (Fig.13C). When you see this icon, charge the battery at
the next opportunity. Fig.12 shows where to attach the USB Micro B side of the cable
into the tool. The USB cable is keyed to plug in only one way, check the orientation of
the cable end and the USB port before plugging in the cable. The tool may be used
while it is plugged in. See Fig.13A-E for information about the changes to the battery
icon and what they mean.
If you wait too long to recharge the battery, the tool will automatically shut down
completely to conserve the remaining charge on the battery. The battery must have a
minimum charge to be recharged. If the tool will not turn on with the on/off button, then
you must charge the tool. When the tool is plugged in after being completely shutdown,
the tool will go through an initialization startup phase, See "Startup Sequence" in this
manual, Pg. #. We recommend that the tool only be charged when the battery icon is
visible to help prolong battery life. Depending on use, the time between charges could
be weekly under heavy use or monthly under light use.
Fig.12
Fig.13B
No Symbol, The Battery
has a Normal Charge
12
Button
Button
Section 3 Rechargeable Battery
The USB Micro B side of the charging
cable plugs into the USB port at the
top of the Indicator as shown. The
other side of the USB cable plugs into
the power supply.
Battery Charge is Low
Then
Then
NOTE: The tool may be
used while charging.
Battery is
Charging
Fig.13D
Fig.13C
LOCK
BUTTON
LOCK
BUTTON
Fig.13A
Battery is Charged, and the
USB cable is still attached
Fig. 13E
Blinking
Stops Blinking
Tabla de contenido
