Rechargeable Battery - Starrett W733.1 Manual Del Usuario

RECHARGEABLE BATTERY

Startup Sequence
1. After the tool has shut down completely, and you have plugged
it in to charge, the tool will flash a sequence of information on
the display, see the examples below (Fig's.14-17). This is normal
for the Micrometer and a posable description of the screens is
shown.
2. At the end of the sequence you will re-initialize the measurement
system. When "Cal" is displayed (Fig.18), move the spindle slowly
in and out, until the display starts to show measurements. This
movement will calibrate the Micrometer.
Calibrate
1. If you don't move the spindle, "Cal" will stay on the display for
about 10 seconds and the display will go blank.
2. To return to "Cal" mode move the spindle or quickly press the
on/off button.
3. If you move the spindle too fast it will take longer for the tool to
initialize.
16 PKG08861-UM733.1