Taurus 3-SIDE SHAVE IPX7 Instrucciones De Uso página 12

assembly set, it is
reccomendend to lubricate
them with some lubricating
oil. Then install them on the
shaving unit and switch it on
and off a few times. Regular
oiling enhances the run time
of the product. (Fig. 7)
Attention: Do not clean more
than one cutter at a time,
since they are all matching
sets. If you accidentally
interchange the cutters, it
could influence the shaving
results.
SUPPLIES:
Supplies for your appliance
model can be acquired from
distributors and authorised
establishments.
Always use original supplies,
designed specifically for your
appliance model.
For optimal shaving
performance, we advise you
to replace the shaving heads
every two years.
HOW TO REMOVE THE
BATTERIES FROM
THE INTERIOR OF THE
DEVICE:
CAUTION: It is important
that the batteries are
fully discharged prior to
its withdrawal from the
apparatus.
CAUTION: the appliance
must be disconnected from
the supply mains when
removing the batteries.
To remove the batteries,
once the life of the appliance,
proceed as follows:
Open the top shell of
the apparatus, removing
previously with the help of a
screwdriver fixing screws.
Identify the battery wires and
cut their (Red and Black). To
avoid risks of a short circuit
with a possible residual
battery load, first cut the
Red wire and protect it by
using insulating tape, then
proceed to cut the Black wire
proceeding in the same way.
Safely remove the battery
from its housing.