iM3 ART-SP6 Instrucciones De Uso página 16

Power Cord / Power Connection
 Always make sure that the power switch is set to the OFF position before performing the
following tasks:
o Plugging and unplugging the AC cord into the back of the unit.
o Plugging and unplugging the 3-prong plug into a grounded electrical outlet.
Safety Instructions
A. Grounding:
Verify that the main unit is connected to a grounded outlet prior to connecting other parts to
the main unit.
B. Main voltage range and fuse:
Check the voltage of the ART-SP6 for compatibility with your local voltage before plugging the
power cord into the outlet.
Foot Control Cable Assembly Connection
Align the pins of the foot control plug with the receptacle on the back of the device and push firmly
until seated.
Water Supply Line Connection
Push the blue water tube (hose) over the stainless steel receptacle on the back of the unit. Then
tighten the screw over it.
Connect the quick connector to the water supply line. The ART-SP6 standard package comes with a
male quick connector. If a female quick connector is necessary, please contact a BONART
authorized dealer to purchase it.
Inspect all connections for leaks
To remove the water line from the ART-SP6, turn off the water supply or disconnect the water
supply line from the water tube. Then loosen the screw on the water tube from the receptacle of
the unit and gently pull the water tube off.
- 14 -