Troubleshooting - Klarstein LIMELIGHT 120 Manual De Instrucciones

TROUBLESHOOTING

• Repairs to the electrical system may only be carried out by a qualified
electrician, and local regulations must be observed. If in doubt, contact the
manufacturer, customer service or an authorised specialist company.
• Disconnect all power connections before opening the appliance.
Problem
The light turns on but
the motor does not run.
The light is off and the
motor does not run.
The housing vibrates.
The air is not extracted
properly.
Potential cause
The ventilation is
blocked.
The engine is damaged.
The lamp is broken.
The plug is loose.
The rotor blade of the
fan is damaged.
The motor is not firmly
seated.
The appliance has not
been hung properly on
the bracket.
The distance between
the cooker and the
extractor hood is too far.
Solution
Switch off the appliance
and have it repaired by
qualified personnel.
Replace the bulb.
Plug the power plug
securely into the wall
socket.
Switch off the appliance
and have it repaired by
qualified personnel.
Remove the cooker hood
and make sure that the
bracket is in the correct
position.
Reduce the distance to
65-75 cm.
EN
55