Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The device is intended solely for the welding processes specified on the rating plate.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.
Proper use includes:
-
-
-
Never use the device for the following purposes:
-
-
-
The device is designed for use in industry and the workshop. The manufacturer accepts
no responsibility for any damage caused through use in a domestic setting.
The manufacturer likewise accepts no liability for inadequate or incorrect results.
Environmental
Operation or storage of the device outside the stipulated area will be deemed as not in
conditions
accordance with the intended purpose. The manufacturer shall not be held liable for any
damage arising from such usage.
Ambient temperature range:
-
-
Relative humidity:
-
-
The surrounding air must be free from dust, acids, corrosive gases or substances, etc.
Can be used at altitudes of up to 2000 m (6561 ft. 8.16 in.)
Obligations of the
The operator must only allow persons to work with the device who:
operator
-
-
-
Checks must be carried out at regular intervals to ensure that operators are working in a
safety-conscious manner.
Obligations of
Before using the device, all persons instructed to do so undertake:
personnel
-
-
Before leaving the workplace, ensure that people or property cannot come to any harm
in your absence.
Mains connection
Devices with a higher rating may affect the energy quality of the mains due to their cur-
rent consumption.
36
carefully reading and following all the instructions given in the operating instructions
studying and obeying all safety and danger notices carefully
performing all stipulated inspection and maintenance work.
Thawing out pipes
Charging batteries
Starting engines
during operation: -10 °C to + 40 °C (14 °F to 104 °F)
during transport and storage: -20 °C to +55 °C (-4 °F to 131 °F)
up to 50% at 40 °C (104 °F)
up to 90% at 20 °C (68 °F)
are familiar with the fundamental instructions regarding safety at work and accident
prevention and have been instructed in how to use the device
have read and understood these operating instructions, especially the section "safe-
ty rules", and have confirmed as much with their signatures
are trained to produce the required results.
to observe the basic instructions regarding safety at work and accident prevention
to read these operating instructions, especially the "Safety rules" section and sign to
confirm that they have understood them and will follow them.
Tabla de contenido
