Idiomas disponibles
Idiomas disponibles
KUKKO 67-1 and 67-2
Working safely with this tool is possible only when the operating and
!
safety information are read completely and the instructions contained
there in are strictly followed.
•
Before each use, check the unit for full functional capability. If the functional
capability is not ensured or if damage is detected, the unit should not be used.
•
When compressing the spring, neither the spring windings nor the jaws should
come in contact with each other, Fig.B
•
The centre line of the spring must always be parallel to the compressing
device, especially for conical springs.
•
Use only suitable jaws for the springs. The spring must rest securely within
the outer rib and the safety ridges. Take care that sliding of the spring out
of the jaws is not possible.
•
The bolts of the jaws must always be firmly tightened.
•
When using impact wrench do not exceed 180 Nm torque limit.
•
For repair, use only original parts.
•
Do not make any construction changes to the unit. Do not replace safety pin
by a stronger safety pin.
The coil spring compressor is exclusively for compressing and expanding of Mc-
Pherson strut springs whereby suitable jaws must be used. Any other or further use
is considered not as intended.
For Your Safety
Use as intended
6
