Troubleshooting - Craftsman 247.370480 Manual Del Operador

WARNING
Always stop the motor and remove key before cleaning, lubricating
or performing any repairs or maintenance on the lawn mower. Always
wear safety glasses during operation or while performing any adjustments
or repairs.
Problem
Motor fails to start
Mower stops while mowing
Excessive vibration
Mower will not mulch grass
Uneven cut

TROUBLESHOOTING

Cause
1. Key not in switch
2. Motor/blade control disengaged.
3. Battery discharged.
4. Mower deck clogged with grass and debris.
1. Discharged battery.
2. Cutting too much grass.
3. Clogged deck.
4. Circuit breaker reset button is tripped.
1. Cutting blade loose.
2. Cutting blade unbalanced.
3. Bent cutting blade.
4. Bent motor shaft.
1. Mower deck clogged.
2. Wet grass.
3. Excessively high grass.
4. Dull blade.
1. Dull blade.
NEED MORE HELP?
Find this and all your other product manuals online.
Get answers from our team of home experts.
Get a personalized maintenance plan for your home.
Find information and tools to help with home projects.
Replacement fuse must be a UL listed or recognized component,
rated 40 amp, 58 volt. If mower blows fuse, contact your nearest
authorized service dealer for repair. Do not use any other type or size
fuse.
1. Insert ignition key.
2. Depress starter button, and engage motor blade control.
3. Charge battery.
4. Unclog mower deck. Make certain blade is free to move.
1. Charge battery.
2. Raise cutting height.
3. Unclog mower deck. Raise cutting height, or cut a
narrower swath.
4. Reset the circuit breaker reset button following the
instructions in the Service and Maintenance section of
this manual.
1. Tighten blade bolt.
2. Balance blade following the instructions in the Service
and Maintenance section of this manual.
3. Replace blade.
4. Contact nearest Sears Service Center.
1. Unclog mower deck. Make certain blade is free to move.
2. Do not mow when grass is wet; wait until later to cut.
3. Mow once at a high cutting height, then mow again at
desired height or make a narrower cutting swath (1/2
width).
4. Sharpen or replace blade.
1. Sharpen or replace blade.
managemyhome.com – for free!
16
WARNING
Remedy