Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Changing the bulb
• Refrigerator and freezer bulbs are energy efficient, long-life
LEDs. Their replacement should therefore not be necessary
during the life cycle of the device.
• The bulb is a 12V direct current LED. In the unlikely event of
a failure, it should be replaced by an authorized technician.
CLEANING
1. Unplug the device.
2. Remove all its contents then remove the accessories and
clean them.
3. Clean the interior and exterior walls with a clean sponge or
soft cloth using hot water or 1.2 liters of water plus a
teaspoon of baking soda.
4. Rinse carefully and dry with a soft, clean cloth. If the
appliance is not going to be used for a long time, it is
recommended to remove all food, clean the inside of it and
leave the door open to allow air circulation to prevent any
unpleasant odor.
Energy saving tips
• Do not install the appliance near sources of heat, such as a stove,
dishwasher or radiator.
• Place the device in a cool, well-ventilated room, and make sure that
the ventilation holes are not blocked.
• Avoid leaving the doors open for long periods of time, as hot air will
enter the compartment, which can cause frost to form and affect
energy consumption.
• Check that there is nothing preventing the doors from closing properly.
Make sure that the door gaskets are clean and that they are not torn or
cut.
EN-26
Tabla de contenido
