Operating Mode Functions; Resettable / Accumulated Totals - Badger Meter LM OG-P2 Advanced Manual De Instalación Y Operación

Meter operation / Operating mode functions
Count down arrow
2. Press the
screen flashes and the batch number icon no longer displays.
Count up mode
Count down mode

7. Operating mode functions

These functions operate the same in manual mode and auto batch mode.
7.1

Resettable / accumulated totals

1. To see the accumulated total and the resettable total:
• Press and hold the
• Continue holding the
• After three seconds the screen changes to the resettable total.
Re-settable total
NOTE: In the count up option the meter counts up to
the preprogrammed batch amount. In the count down
option the meter counts from the programmed batch
amount down to zero. Batch number 3 is always in the
count down mode.
button to lock in the batch quantity when batch size is selected. The
•
If the meter is in count up mode, the display shows
zeros.
•
If the meter is in the count down mode, the desired
batch size appears on the screen.
button to see the accumulated total.
button.
2. "Reset total" displays the total fluid dispensed since
the resettable total was last set back to zero.
3. Press the
set it back to zero.
4. Release the
screen.
LM_OGP2Adv_BA_89_1008
button while viewing "Reset total" to
button to return to the operating
page 30/92