Count Up / Count Down Modes - Badger Meter LM OG-P2 Advanced Manual De Instalación Y Operación

Meter operation
Auto batch program mode, option 3
NOTE: See Count Up/Down Mode specifications under 6.3.
3. After the batch size is selected, press the
dispense fluid.
Auto
icon
5. Release the trigger, allowing it to fall back.
6. The flow automatically shuts off after the batch quantity has dispensed.
7. After the batch quantity has been dispensed the meter is a free flow-dispensing
handle until the reset button is depressed.
NOTE: In case of an emergency or to interrupt a batch, the meter is equipped with an
emergency override (see emergency override under 7.2).
8. The user has the option to top off the fluid at the end of a batch.
To top off the fluid, pull the trigger to begin the flow and release it when the desired
amount has been pumped.
9. Press the
to dispense the next batch.
6.3

Count up / count down modes

1. When in the auto batch programming mode, press the
up/count down arrows flash in the display.
Count up arrow
NOTE: When programming option 3:
• Press the 10 button to increase a batch amount in
increments of 100 units
• Press the 1 button to increase a batch amount in
increments of 10 units
• Press the 0.1 button to increase a batch amount in
increments of 1 unit
Auto
batch
size
button when finished. The display resets and the meter is now ready
• Press the
down.
• Press the
down.
LM_OGP2Adv_BA_89_1008
button to lock in the batch and
4. Pull the trigger to begin the flow.
The solenoid valve in the meter
automatically locks
valve in the full open position.
The meter always locks in the maximum
open position.
button to toggle between count up/count
button to select count up or count
page 29/92
the dispensing
button and the count