Scott Living HDSLFP60L-3A Instrucciones De Montaje página 9

Assembly (continued)
9
Attaching top panel
□
Ask for assistance to place the top panel (O) onto the upper vertical panels properly and fasten it in place with eight
cam locks (DD).
10
Attaching back panels
□
Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no
gaps between the parts. This will help keep the unit square.
□
Ask for assistance to flip around the previous assembly at its front edges.
□
Pick up the middle back panel (V) and align the pre-drilled holes against the upper long edge with the pilot holes on
the back of the top panel (O). Attach it in place using the provided washer head screws (GG).
□
Using the pilot holes as a guide, align and attach both side back panels (Y) to the mantel with the provided washer head
screws (GG).
NOTE: We recommend attaching back panel with the screws at the corners first.
O
L
K
V
Y
N
DD
N
M
Y
The ventilation holes are
located at the bottom.
GG