Assembly (continued)
19
Positioning ember bed
□
Set the ember bed (E) onto the heater (A) as shown.
□
Push ember bed forward against the front flange of heater.
□
Position the USB cable as shown below.
20
Attaching wall panel
□
Fold the wall panel (H) as shown. Then position yourself at back side of heater (A).
□
Hold wall panel (H) at the angle shown below and insert lower back edge into metal slots on back of heater (A).
□
Tilt wall panel (H) forward until bottom corner inserts into lower U-channels on both upright arms (B and C).
□
Continue to tilt wall panel (H) forward until the top corner inserts into upper U-channels on both upright arms (B and
C).
C
A
B
H
A
E
E
U-channels
A
USB cable
H