Scott Living HDSLFP60L-3A Instrucciones De Montaje página 17

Assembly (continued)
25
Installing fireplace insert
□
Lift the fireplace insert carefully into the back of the assembled mantel and centre it in the opening.
□
Using the pilot holes as a guide, fasten two L-shaped brackets (KK) onto the firebox holder (S) with four pan head
screws (BB). Make sure that the right-angle side is flush with the short edge of firebox holder (S).
□
Using the pilot holes as a guide, fasten the firebox holder (S) between the partition panels (L and N) with four pan
head screws (BB).
Q
26
Installing acrylic stopper
□
Remove the paper backing of acrylic stopper (VV), then properly align the acrylic stopper into the cutout on the
acrylic stopper template on the front of the top panel (O). Press down on the acrylic stopper to help adhesion.
NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat panel television on
the top panel. Otherwise, skip to next step.
□
At the back of top panel (O), grip the heads of plastic tacks with pliers, with twisting motion pull tacks loose to
remove the acrylic stopper template.
H
V V
O
O
S
N
S
V V
O
S
L
S
BB
BB
KK
L/N
KK