VANTRUE Element 3 Manual De Usuario página 31

Note:
1. To ensure the camera works properly in park mode, please use the
hardwire kits or other stable and continuous power supply to power the
dash cam.
The best working environment temperature of E3 is -4-158°F(-20°C to
2.
70°C). We recommend using collision detection within this temperature
range, so once the temperature exceeds the normal working tempera-
ture range, it will automatically shut down. If the temperature is high,
please turn off the camera when parking.
3. Time-lapse video recording and parking mode (including collision
detection, motion detection, low bitrate recording, and low framerate
mode) can only be enabled one at a time. When one is enabled, the
other will be automatically disabled.
4. All videos recorded in parking mode(Collision Detection, Motion
Detection, Low Bitrate Recording, Low Framerate mode) will be saved
in the normal video folder. In order to prevent the video in parking
mode from being overwritten in a loop, please check and save the
required files in time to prevent loss.
Collision Detection
When collision detection is enabled, the
recording interface, indicating that the recorder is currently using collision
detection mode. Collision detection sensitivity can be adjusted from 1 to
Parking Mode
Collision Detection
Motion Detection
Low Bitrate Mode
Low Framerate Mode
OK
- 27 -
icon will be displayed on the
N E N N E N E E