Candy FIDC X676 Instrucciones De Uso página 4

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
and cause the glass to shatter.
• The oven must be switched off before removing the removable
parts. After cleaning, reassemble them according the instruc-
tions.
• Only use the meat probe recommended for this oven.
• Do not use a steam cleaner or high pressure spray for cleaning
operations.
• IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH-
OUT PLUG:
• HE APPLIANCE MUST NOT BE CONNECTED TO THE POWER
SOURCE USING PLUG OR SOCKETS, BUT MUST BE DIRECTLY
CONNECTED TO THE SUPPLY MAINS. The connection to the
power source must be carried out by a suitably qualified profes-
sional. In order to have an installation compliant to the current
safety legislation the oven must be connected only placing an
omnipolar breaker, with contact separation compliant to the re-
quirements for overvoltage category III, between the appliance
and the power source. The omnipolar breaker must bear the
maximum connected load and must be in line with current leg-
islation. The yellow-green earth cable should not be interrupted
by the breaker. The omnipolar breaker used for the connection
must be easily accessible when the appliance is installed.
The connection to the power source must be carried out by a
suitably qualified professional considering the polarity of the
oven and of the power source.
The disconnection must be achieved incorporating a switch in
the fixed wiring in accordance with the wiring rules
• IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH
PLUG:
The socket must be suitable for the load indicated on the tag
and must have ground contact connected and in operation. The
earth conductor is yellow-green in colour. This operation should
be carried out by a suitably qualified professional. ln case of in-
EN 4
Tabla de contenido
loading

Este manual también es adecuado para:

Fcid x676Fidcp x696Idea fidc x886

Tabla de contenido