Idiomas disponibles
Idiomas disponibles
Bathys
U s e r m a n u a l
5. Playing multimedia - Volume
Play / pause
Next
Previous
Increase volume
Reduce volume
6. Charging the headphones
To charge the headphones, use the USB-C® supplied and connect it to the USB-C® input on the right-hand
earcup of the headphones. The power switch must be in either the OFF or ON position. The headphones
must be switched off while they are being charged.
If you use a USB AC adapter, it must have a 5-volt output and a 300mA current as a minimum.
The headphones come equipped with the fast charging feature. To use it, connect the device to a 2-amp
(2000mA) adapter.
15 minutes of fast charging will give you around 5 hours of additional listening time. It takes around
one and a half hours to fully charge the headphones (with 2 amps). With a full charge, you will have
approximately 30 hours of battery life.
The battery's performance diminishes over time and the more times it is charged. The battery life, charging
time and fast-charging time shown are therefore likely to change.
During charging, the battery light will flash white. Once the battery is fully charged, the battery light will
stay white.
Press the multifunction key
Press the multifunction key twice
Press the multifunction key three times
Press the + key
Press the - key
19
