Fulgor Milano FWC 8200 U TC Instrucciones De Instalacion Y Uso página 30

EN
temperature adjustment due to the critical mass within a full
wine cellar.
Once the temperature is set, it is strongly advised not to toy
with it or adjust frequently. The thermostat will maintain the
temperature inside the wine cellar within a +/- 2.5ºC range.
But the thermal inertia of the wine and the glass is such that
within this temperature range, the actual temperature of the
wine will only fluctuate 0.5ºC to 1ºC.
SINGLE WINDOW DISPLAY BOARD OPERATING INSTRUCTION:
• 1 "ON/OFF" Power button:
Press the button and hold for 3 seconds to power off
(Window 4 digital countdown displays 3, 2, 1,). Press
again, the power turns on.
• 2
Upper zone temperature setting up
button
Press one time, window 4 the set value will increase 1˚C.
Max. Setting Temperature: 20˚C.
• 3 Upper zone temperature setting down
button:
Press one time, window 4 the set value will reduce 1˚C.
Min. Setting Temperature: 5˚C.
• 4 Window:
Display upper zone temperature.
• 5
Window:
Display lower zone temperature.
10
mod. 88cm
• 6 Lower zone temperature setting up
button:
press one time, window 5 the set value will increase 1˚C.
Max. Setting Temperature: 20˚C.
• 7 Lower zone temperature setting down
button:
press one time, window 5 the set value will reduce 1˚C.
Min. Setting Temperature: 5˚C.
• 8 Lamp button:
Press the button and the lamp turns on, the lamp will turn off
once press again.
• 8
C/F display conversion function keys:
Set the conversion degrees Celsius / Fahrenheit display.
Press and hold for 3 seconds the display window will be
into degrees Celsius or Fahrenheit