Introduction; Device Description (Fig. 1) - Scheppach HG35 Traducción Del Manual De Instrucciones Original

1.

Introduction

Manufacturer:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
24 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description (Fig. 1)

1. Protective glass
2. Polishing wheel *
3. Lock nut
4. Connection thread
5. Flexible shaft
6. Black sleeve
7. Collet holder
8. Speed control
9. On/off switch
10. Knurled screw
11. Workpiece support
12. Grinding disc *
13. 5 cutters
14. 4 cleaning brushes
15. 3 brass brushes
16. 10 grinding pencils
17. 5 grinding belts Ø15 mm
18. Work arbor for grinding belts Ø15 mm
19. 5 grinding belts Ø9 mm
20. Work arbor for grinding belts Ø9 mm
21. 3 collets (2.0 - 2.4 - 3.2 mm *)
22. Dressing stone
23. Combination key
24. Work arbor for polishing felts
25. 5 polishing felts Ø25 mm
26. 5 polishing felts Ø13 mm
27. Polishing compound
28. 40 cutting wheels Ø24 mm
29. 12 cutting wheels Ø32.5 mm
30. Work arbor for cutting wheels
31. Protective glass fixing screw
32. Spark protection
33. Spark protection fixing screw
34. Shaft
35. Centring flange
36. Tension washer
37. Union nut
38. Attachment for the flexible shaft
38a. Locking pin
39. Fixing screw
40. protective cover
www.scheppach.com