Thermostat Installation
Wireless Installation
Mounting the thermostat to the wall
• Remove the thermostat cover;
• Use the supplied wall anchors and mounting screws to
secure the thermostat to the wall;
• Insert two (2) AA-cell batteries (not supplied) into the
thermostat battery compartment;
• Follow the "Thermostat Configuration" instructions
starting on page 11.
• Replace the thermostat cover and screw in the locking
screw.
Wired Installation
Mounting the thermostat to the wall
• Connect R & C from HVAC unit to the corresponding
wires on the harness by splicing 24VAC and common
wires from the thermostat into the 24VAC and common
wires to the zoneline.
• Remove the thermostat cover;
• Use the supplied wall anchors and mounting screws to
secure the thermostat to the wall;
• Follow the "Thermostat Configuration" instructions
starting on page 11.
• Replace the thermostat cover and screw in the locking
screw.
10
GL
GH OB W
R
Y
C
AUX
GL
GH OB W
R
Y
C
AUX
F
F
R
C
49-5000637 Rev. 0