Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Apps
Apps
To cancel the voice guidance, press the
Each time you press the button, the voice guidance
turns on and off.
Switching the Android Auto screen and the
current playback source screen
You can switch the Android Auto screen and the
current playback source screen when the App of the
Android Auto without audio-output is used.
Press and hold FNC-
button on the
monitor panel.
• Each time you press and hold the button, the screen
alternates.
• You can also use the pop-up function menu
(page 11).
– The screen cannot be switched in some cases, such
as while the picture from the connected camera or
a message window is displayed.
button.
Using the Apps of an Android device — USB
Mirroring
This feature is only used with Android device.
By installing JVC's Mirroring OA App into your Android
device, the screen of the Android device is displayed
on the monitor panel of this unit, and you can operate
the Android device using the touch panel of this unit.
• For details about JVC's Mirroring, visit
<https://www.jvc.net/cs/car/>.
Compatible Android devices
Android version 7.0 or later
Installing JVC's Mirroring OA App
You can obtain "Mirroring OA for JVC" in Google Play.
• Make sure to install the most recent version into your
Android device.
• When you use "Mirroring OA for JVC" for the
first time, the terms of service are displayed. It is
necessary to agree to the terms of service to use this
feature.
Connecting an Android device with JVC's
Mirroring OA App installed
Connect an Android device with JVC's Mirroring OA
App installed via both USB and Bluetooth connection
(page 7).
Starting USB Mirroring
Preparation:
• Unlock your Android device beforehand.
• Make sure that the JVC's Mirroring OA App is
installed.
• Select [Mirroring for Android] for the <Android
Mode Select> setting.
1
Connect the Android device.
1 Connect the device with Bluetooth.
– Pair the device with the unit via Bluetooth.
See "Pairing a Bluetooth device" on page 7.
– Select [USB Mirroring] on the profile setting
of the <Device List> screen (page 9).
2 Then, connect the device with USB.
Then follow steps 2 to 4 below on the Android
device screen:
2
Touch the icon of JVC's Mirroring OA App.
3
Touch [OK] to start JVC's Mirroring OA
App.
4
Touch [Start now] to capture the Android
device screen to the screen of this unit.
ENGLISH
15
Tabla de contenido
