Assembly Instruction - Whalen SPUS-FBBK-GM Manual De Instrucciones

NOTE: DO NOT fully tighten all cam locks and bolts until you finish assembling all parts. Once
assembled, go back and fully tighten all cam locks and bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A) and Side Panels
(B and C) using a Phillips screwdriver.
Cam locks face inward
3. Attach the Top Back Stretcher (F) to the Top Panel (A) with two Wood Dowels (3) and two Cam Locks (1).
(Refer to page 2 on Cam Lock system operation supplement).

Assembly Instruction

B
A
F
3
1
3
C
2
1
A
5