Cam Lock System Operation - Whalen SPUS-FBSF-GM Manual De Instrucciones

M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Fallbrook File
MODEL # SPUS-FBSF-GM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM

CAM LOCK SYSTEM OPERATION

1
You are now ready to assemble the KD unit
MAXIMUM LOAD 22.7 kg / 50 lb
MAXIMUM LOAD 4.5 kg / 10 lb
MAXIMUM LOAD 13.6 kg / 30 lb
2
2
3