Personal Safety - Casals MT300EK Manual De Instrucciones

- CAUTION: Maintain the appliance dry.
- Do not use the appliance with damp hands or feet,
or when barefooted.
- Do not force the power cord. Never use the power
cord to lift up, carry or unplug the appliance.
- If using the appliance outdoors, use a suitable
cord extension.
- As an additional protection to the electrical
supply for the appliance, it is advisable to have
a differential current device with a maximum
sensitivity of 30 mA. Ask for advice from a
competent installer.
- Do not touch the plug with wet hands.

Personal safety:

- Keep any possible distractions well away from you
when using the appliance as they may cause you to
lose your concentration. Use common sense when
operating the appliance. Do not use it when tired or
under the effect of drugs, alcohol or medication. A
moment of inattention while operating this type of
appliance may result in serious personal injury.
- Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hardhat, or hearing protection used for
appropriate conditions will reduce personal injuries.
- Avoid accidental starting. Ensure the switch is in
the off-position before plugging in. Carrying power
tools with your fingers on the switch or plugging
in power tools that have the switch in invites
accidents.
- Remove the tool fastening key(s) before starting up
the appliance. A key or tool that is not well fastened
to the appliance may cause accidents on start-up.
- Do not overreach. Keep proper footing and balance
at all times. This will allow you to maintain control
of the appliance at all times.
- Dress properly. Do not wear baggy or loose-hanging
clothes or accessories. Keep your hair, clothing
and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
- Use clamps or a vise to secure the object to be
worked in place. The work will be safer if both hands
are free to control the tool.
- Do not touch any of the appliance's moving parts
while it is operating.
- Do not touch the blade or the workpiece
immediately after operation. They might be extremely
hot and burn you.
- Do not grind any material containing asbestos.
Working with asbestos and/or silica wheel, the dust
produced is harmful for health. Prevent inhalation
of these types of dust by following the appropriate
health and safety regulations.
- Protect yourself from contact with and the
inhalation of dust created by sanding wood and
metal surfaces and surfaces coated with lead paint.
Use protective equipment that complies with the
appropriate health and safety regulations.
- Exercise precaution after employing the stop
operation on the appliance as the tool will continue
moving from the effect of its own mechanical inertia.
- Use the appliance for dry sanding for cutting dry
wood and plastic or for scrapping dry material.
Water entering the housing of the electric tool
increases the danger of an electric shock.
Use and care:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if its accessories are not
properly fitted.
- Do not use the appliance if the accessories or
consumables attached to it are defective. Replace
them immediately.
- Use the appliance handle/s, to catch it or move it.
- Do not force the appliance's work capacity. Use the
correct power tool for each application. The correct
power tool will do the job better and safer at the rate
for which it was designed.
- Do not use the appliance if the on/off switch does
not work.
- Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventative safety measures
reduce the risk of starting power tools accidentally.
- This appliance is not for professional or industrial