Safety Instructions - EAS ELECTRIC EBP08WZRN Manual De Instrucciones

2. SAFETY INSTRUCTIONS

To prevent injury to the user, other people, or property damage, the following
instructions must be followed. Incorrect operation due to ignoring of instructions may
cause harm or damage.
Install the unit only when it complies with local regulations, by-laws and standards.
Check the main voltage and frequency. This unit is only suitable for earthed sockets,
connection voltage 220 – 240 V ~ / 50Hz.
The following safety precautions should always be taken into account:
Be sure to read the following WARNING before installing the unit.
-
Be sure to observe the cautions specified here as they include important items
-
related to safety.
After reading these instructions, be sure to keep it in a handy place for future
-
reference.
Do not install the unit yourself.
Incorrect installation could cause injury due to fire, electric shock, the unit falling or
leakage of water. Consult the dealer from whom you purchased the unit or a
specialized installer.
Install the unit securely in a place.
When insufficiently installed, the unit could fall causing injury. When installing the
unit in a small room, please take measures (like sufficient ventilation) to prevent the
asphyxia caused by the leakage of refrigerant.
Use the specified electrical wires and attach the wires firmly to the terminal
board (connection in such a way that the stress of the wires is not applied to the
sections). Incorrect connection and fixing could cause a fire.
Be sure to use the provided or specified parts for the installation work.
The use of defective parts could cause an injury due to possible fire, electric shocks,
the unit falling etc.
Perform the installation securely and please refer to the installation instructions.
Incorrect installation could cause an injury due to possible fire, electric shocks, the
unit falling, leakage of water etc.
Perform electrical work according to the installation manual and be sure to use
a dedicated section. If the capacity of the power circuit is insufficient or there is
an incomplete electrical circuit, it could result in a fire or an electric shock.
The unit must always have an earthed connection.
If the power supply is not earthed, you may not connect the unit.
Never use an extension cable to connect the unit to the electric power supply.
4 V.1