Iberspa SW11487 Manual De Uso E Instalación página 35

MODE READY & REST / READY IN REST MODE
In order for the spa to heat, a pump needs to circulate water through the heater. The
pump that performs this function is known as the "heater pump." The heater pump can
be either a 2-Speed Pump 1 or a circulation pump. READY Mode will circulate water
every 1/2 hour, using Pump 1 Low, in order to maintain a constant water temperature,
heat as needed, and refresh the temperature display. This is known as "polling."
does not occur, the temperature display may not show a current temperature until
the heater pump has been running for a minute or two.
continuously. Since the heater pump is always running, the spa will maintain set
temperature and heat as needed in Ready Mode, without polling.
Main Screen
To next item in
Main Menu
Toggle between READY and REST
If not toggled
Pressing Light when the display is toggled will go to Main Screen.
READY Mode will allow the spa to Poll and determine a need for heat. The panel will maintain a "current" temperature display.
Main Screen
1 Hour
The Main Screen will display normally during Filter Cycles or when the spa is in use.
conjuncton with the heater will run so that temperature can be sensed and displayed.
READY-IN-REST MODE
READY/REST appears in the display if the spa is in Rest Mode and Jet 1 is pressed. It
is assumed that the spa is being used and will heat to set temperature. While Pump 1
or 1 hour has passed. After 1 hour, the System will revert to Rest Mode. This mode can
also be reset by entering the Mode Menu and changing the Mode.
Main Screen Main Screen
J
While the Temperature is still
until MODE appears in the LCD.
Main Screen
To Set
*****
Waiting
Several Seconds
Reverts to Original Setting
| TP600
| TP600
KEY
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message -
every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending
Waiting time that keeps the last change to a
menu item.
Waiting time (depends on menu item) that reverts
*****
to original setting and ignores any change to that
menu item.
ENG
35