Dip Switch Functions - Iberspa SW11487 Manual De Uso E Instalación

INSTALLATION OF THE DIFFERENTIAL
The electrical installation should incorporate a high-sensitive 2-pole
supplied with the Spa).
014
WARNING
once a month, to check its good working order.
CONNECT THE ELECTRICAL CONTROL PANEL TO THE DIFFERENTIAL
SWITCH
Before carrying out any work on the Spa, make sure it is disconnected from the
mains
depending on the location and applicable law. The cable section will vary depending
on the Spa model and the distance of the installation.
The maximum power must be considered, depending on the "High Amp" or "Low

DIP Switch Functions

Fixed-Function DIP Switches
A2 In "ON" position, add one high-speed pump (or blowe) with Heater.
A3 In "ON" position, add two high-speed pumps (or 1 HS Pump and Blower) with
Heater.
A4 In "ON" position, add four high-speed pumps (or 3 HS Pumps and Blower) with
Heater.
A5 In "ON" position, enables Special Amperage Rule B. See Special Features section
enables Special Amperage Rule A.
24