Electrical Connections - Warn Industries AIR-POWER VTC Guía Del Operador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
COMPRESSOR ELECTRICAL CONNECTIONS
RED CABLE
+
BLACK CABLE
BATTERY
WA R N I N G
CHEMICAL AND FIRE HAZARD
Failure to observe these instructions
could lead to severe injury or death.
• Never operate this unit without a fuse.
• Always replace fuse with the proper type
and rating.
WA R N I N G
To avoid serious injury or death
from electrical fire:
• Never route electrical cables:
-Across any sharp edges.
-Through or near moving parts.
-Near parts that become hot.
• Always insulate and protect all
exposed wiring and electrical
terminals.

Electrical Connections

• Route battery connection cables in areas which
will not cause them to chafe or cut through the
insulation causing a potential short circuit.
• Upon completion of installation, refer to operating
instructions and check compressor for proper
operation.
This unit is equipped with a fuse. The red light in the
power switch will not light if the fuse opens. For a
replacement fuse, please contact a Warn Industries,
Inc. service representative.
Part Number 76800, SPI Compressor: 150 Amp fuse
Part Number 75789, VTC Compressor: 200 Amp fuse
Warn Industries, Inc.
Phone: 1-800-543-9276
Web: www.warn.com
4
COMPRESSOR OPERATING INSTRUCTIONS
VTC
AIR CONNECTOR
RELIEF
VALVE
LEADS TO BATTERY
SPI
AIR CONNECTOR
POWER SWITCH
LEADS TO BATTERY
5
POWER SWITCH
RELIEF VALVE
LOCATED BEHIND COVER
Tabla de contenido
loading

Este manual también es adecuado para:

Air-power spi

Tabla de contenido