Instructions For Refrigerant R290 - Klarstein 10041143 Manual De Instrucciones

EN
22

INSTRUCTIONS FOR REFRIGERANT R290

Safety instructions
• The air conditioner must be stored and transported in an upright position.
Otherwise irreparable compressor damage may occur. Allow the unit to stand
for at least 24 hours before operation.
• Before cleaning, switch off the appliance and disconnect it from the power
supply.
• Please check that the product generates a constant flow of air! Please make
sure that the air inlets and outlets are not blocked.
• Operate the appliance on a horizontal surface to prevent leaks.
• Every person working on a refrigerant circuit should have a valid certificate
from an industry accredited assessment body. This ensures competence in
the safe handling of refrigerants in accordance with an industry-recognised
assessment specification.
• When the appliance no longer operates, dispose of it properly.
• Store the appliance in a well-ventilated place when not in use.
• Store the appliance in a place where no damage can occur to it.
• Repairs may only be carried out by the manufacturer or an authorised
specialist company.
• Do not damage any of the components of the refrigerant circuit. Leaking
refrigerant may not be noticed as it is odourless.
• Maintenance and repairs must be carried out under the supervision of
specialists in the use of flammable refrigerants.
Information for areas with refrigerant pipes
• Keep pipework to a minimum.
• Take care not to damage the pipelines.
• Appliances with flammable refrigerants may only be installed in a well-
ventilated room.
• Comply with national gas regulations.
• All mechanical connections must be freely accessible for maintenance
purposes.
CAUTION
Fire hazard! This device contains the flammable refrigerant R290. If
the refrigerant is leaking and exposed to an external ignition
source, there may be a fire hazard.