Yuasa YCXLI2 Guia Del Usuario página 6

Lead acid charging and maintaining process
Voltage
(VOLTS)
Current
(AMPS)
1) Qualification – Checks battery condition to determine whether the
rejuvenation stage or charge cycle is required.
2) Rejuvenation – Automatic stage for batteries in poor condition. Breaks
down low levels of sulphation using new patented technology. Note: this
mode will not recover batteries with severe levels of sulphation as this is
a permanent and irreversible condition.
3) Soft start – Increases your battery life by gently starting to charge the
battery until the battery reaches a set Voltage.
4) Bulk charge – Reduces charging time by delivering maximum charge
until the battery reaches a set Voltage.
5) Absorption – Uses constant Voltage and ensures the battery receives a
full charge without overcharging the battery.
6) Equalisation – Restores full capacity to batteries by removing acid
stratification.
7) Analysis – Checks the battery condition to ensure it is fully charged.
8) Float – Maintains the battery at 100% charge.
9) Maintenance – Special pulse charge for long-term maintenance to
ensure the battery is in optimal condition.
Lithium-ion charging and maintaining process
Voltage
(VOLTS)
Current
(AMPS)
1) Activation – Wakes up the lithium battery BMS to detect battery Voltage
to enable the charger to start charging.
2) Soft start – Increases your battery life by gently starting to charge the
battery until the battery reaches a set Voltage.
3) Bulk charge – Reduces charging time by delivering maximum charge
until the battery reaches a set Voltage.
4) Absorption 1 – Uses constant Voltage and ensures the battery receives
charge without overcharging the battery.
5) Absorption 2 – Steps up the constant Voltage and ensures the battery
receives a full charge without overcharging the battery.
6) Full – Battery is 100% charged and the charger output will switch off.
7) Analysis – The charger will monitor the battery Voltage and will restart
when required.
6
All bars off
On
Power supply mode active
Float phase or maintenance phase.
Battery is fully charged