LED
6V LED
Amber ON
12V LED
White ON
6V or 12V
Blinking
LED
Flash
ON
ON
Charging process
Voltage
(VOLTS)
Current
(AMPS)
1) Qualification – Checks the battery's initial condition to determine if soft start
charging or recovery mode charging is required.
2) Soft-start – Increases your battery life by gently starting to charge the battery
until the battery reaches a set Voltage.
3) Bulk – Reduces charging time by delivering maximum charge until the battery
reaches a set Voltage.
4) Absorption 1 – Uses constant Voltage and ensures the battery receives charge
without overcharging the battery.
5) Absorption 2 – Steps up the constant Voltage and ensures the battery receives
a full charge without overcharging the battery.
6) Analysis – This stage checks the condition of the battery after the charge cycle
is completed. If the battery Voltage drops too quickly during the analysis mode,
this means the battery is probably faulty.
7) Float – Maintains the battery at 100% charge.
6
Status
6V battery mode selected
12V battery mode selected
In eco mode
In soft start
In charging cycle, bulk charge or absorption
charge
In float and maintenance mode or fully
charged
Descriptions