Idiomas disponibles
Idiomas disponibles
ENG
Pairing your MiiBLASTER XL MIIEGO® Bluetooth speaker
1: Make sure the speaker is charged and turned OFF.
2: Press and hold the
button for 2 seconds until the indicator light flashes
Blue (pairing mode).
3: Activate Bluetooth on your phone or other device and search for Bluetooth
devices and select: MiiBLASTER XL.
When MiiBLASTER XL is connected the Blue light is constantly on.
The speaker will remember your phone/device and automatically reconnect
the next time you turn it on.
An unpaired speaker will automatically turn off after 6 minutes.
Charging the MiiBLASTER XL speaker
Use a 5V/1A or 2A USB adapter for charging.
During charging the 4 LED battery indicator lights will flash one by one. When
fully charged the lights will stay on permanently.
Full charging time is around 7 hours with 2A and 14 hours with 1A.
Next time charging
When the first battery LED indicator light is flashing every 5 seconds, the
battery status is low and needs charging.
You will then also hear a battery warning tone every 120 seconds.
Turning Your MiiBLASTER XL On and Off
ON: Press the
Button for 2 seconds until a tone is heard.
OFF: Press the
Button and a tone will be heard.
Activate Siri on iOS-device: Press and hold the PLAY button for 2-3 seconds
(works only in Bluetooth mode).
Pairing and connecting 2 x MiiBLASTER XL speakers with TWS
TWS only works when connecting two MiiBLASTER XLs by MIIEGO® together.
1: Turn on both speakers (Bluetooth mode). Make sure they are unconnected.
2: Press and hold button 6 on one speaker for 4 seconds. The product emits a
tone to indicate entering TWS-pairing mode.
3: Activate Bluetooth on your audio source and connect with the product. The
product emits three tones and button 6 lights up to indicate successful TWS-
pairing.
2
