Backlight - Wiha 45215 Manual De Instrucciones

INSTRUCTION MANUAL
To select desired measurement mode
Apply short press (less than 1 s) on the
SELECT button. After one beep sound
release the button.

Backlight

To turn backlight on/off
Press BACKLIGHT button and hold it
pressed (for more than 1 s) until you hear
double-beep sound.
Range
Use RANGE button to toggle between Auto Range and Manual Range modes and
cycle through different Manual Ranges as described below:
• When in Auto Range, short press (less than 1 s) on RANGE/RELATIVE button
will switch Multimeter to Manual Range.
• When in Manual Range, short press (less than 1 s) on RANGE/RELATIVE button
will cycle through different Manual Ranges.
• When in Manual Range, long press (more than 1 s) on RANGE/RELATIVE button
will switch Multimeter back to Auto Range.
To switch to Manual Range
When in Auto Range mode, apply short
press (less than 1 s) on the RANGE button.
After one beep sound release the button.
24
AUTORANGE