Introduction / Scope Of Supply - Wiha 45215 Manual De Instrucciones

CAT IV/600 V; CAT III/1,000 V
Instrument complies to Measurement Category CAT IV/600 V and CAT III/1,000 V
against earth.
Description
CAT II: Measurement category II is applicable to test and measuring circuits con-
nected directly to utilization points (socket outlets and similar points) of the low-voltage
MAINS installation.
CAT III: Measurement category III is applicable to test and measuring circuits con-
nected to the distribution part of the building's low-voltage MAINS installation.
CAT IV: Measurement category IV is applicable to test and measuring circuits con-
nected at the source of the building's low-voltage MAINS installation.
The instruction manual contains information and references, necessary for safe
operation and maintenance of the instrument. Prior to using the instrument, the
user is kindly requested to thoroughly read the instruction manual and comply
with it in all sections.
Failure to read the instruction manual or to follow with the warnings and refer-
ences contained herein can result in serious bodily injury or instrument damage.
The respective accident prevention regulations established by the professional
associations are to be strictly enforced at all times.

Introduction / Scope of supply

You have purchased a high-quality measurement instrument which will allow you to
carryout measurement over a long-time period. The multimeters are universally usable.
The multimeters were built after the latest safety regulations.
The multimeters are a valuable help in the handcraft or industrial area as well as for the
hobby electronics technician at all standard measurement tasks.
The digital multimeter is characterised by the following features:
• Digital multimeter with extra large display
• 3¾-digit LC display with 6.000 counts and bargraph
• Safety according to DIN VDE 0411, EN 61010, IEC 61010, CATIII/1,000 V
• Voltage (measures up to 1,000 V), current and resistance measurement
• Non-contact voltage test (NCV)
• V SCAN mode: Automatic AC/DC detection and measurement
• Separate mV AC/DC measurement
• Diode and acoustical continuity test function
• Temperature measurement
• Capacity, frequency and duty cycle measurement
• Automatic range selection
• Buttons with Hold, Relative, Minimum, Maximum and Average functions
• Auto power-OFF function
• Impact and shock proof due the standard protective holster
• Compact size
Lieferumfang
• 1 x Digital multimeter 45215
• 1 x Protective holster
• 2 x Test leads (1x red, 1x black)
• 2 x Batteries 1.5 V, IEC LR03
• 1 x Instruction manual
EN
21