Section 6 | Measurements - DRAMINSKI GRAIN MASTER Manual De Uso

In order to carry out grain moisture measure-
ments you have to:
a) switch the device on using
short introductory information a list of available
species appears. The GMS usually highlights the
name of the species previously tested, for exam-
ple: „Canola"
GMS
Choose species
Canola
Cannabis sativa
Blue lupine
Yellow lupine
b) fill in the measuring chamber with full dispenser
of the tested grain (dispenser is enclosed to the
set);
c) put the knob of the measuring chamber on the
threaded spindle paying attention to proper
threading. Then manually tighten the knob so
that it had contact with the grain;
22

SECTION 6 | MEASUREMENTS

d) put the ratchet wrench on the hexagonal spindle
, button, after a
e) when this is done, you should select the species
f) after confirmation you will hear 1 short sound sig-
of the knob, set the switch of the wrench direc-
tion properly and tighten the knob until it is
totally blocked. During grinding you should hold
the device strongly;
using or buttons and start measuring us-
ing button;
nal informing that the measurement begins, and
on the screen you will see a message "Analys-
ing..." and the progress bar, e.g.:
GMS
Canola
Analysing...
During this time you should not touch the
measuring chamber.
GMS
Canola
Analysing...