Intended Use - BGS technic 9394 Instrucciones De Uso

TOOLS
1 Crankshaft pulley alignment tool, to be used as OEM EN-48585
2 Flywheel holding tool, to be used as OEM EN-43653 / J43653
3 Tensioner retaining pin 2.5 mm, to be used as OEM EN-955-10 / KM 955
4 Tensioner locating pin 4.0 mm, to be used as OEM EN-955-20 / KM 955-20
5 Tension plunger resetting tool, to be used as OEM EN-45027-1 / J-45027-1
6 Tension plunger holder, to be used as OEM J45027-2 / EN45027-2 / EN-45027
7 Camshaft locking tool left hand, to be used as OEM EN-49212 / EN-49212-1
8 Camshaft locking tool right hand, to be used as OEM EN-49212 / EN-49212-2
9 Camshaft adjuster holding tool, to be used as OEM EN-48953
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This timing tool set is specifically designed for the high power output 2.0 L and 2.4 L twin cam turbo
charged petrol engines found across the GM, Chevrolet and Saab ranges. The set provides all the
tools required to set and hold the camshaft, the crankshaft and the chain tensioner tools when
performing major engine work or replacing the cam chain and associated tool.
VEHICLE LIST
Manufacturer
Opel / Vauxhall
Chevrolet
Saab
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for Opel, Vauxhall, Saab, Chevrolet
Model
Astra
Insignia
OPC
Antara
OPC/VXR
Captiva Turbo
E85
HHR
Turbo T-Bi Power
Malibu
9-5
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
Type 2.0 L
LHU / A20NFT
LTG / A20NHT
LDK / A20NHT
BGS 9394
2.4 L
A24XE
A24XF
LE5
LE9
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed