Technical Data; Carton Contents - SNOWJOE 24V-X4-SB24 Manual Del Operador

Technical Data
Motors ................................ Plowing motor: 3200 W brushless
Battery Voltage* Max ................................... 96V D.C. (4 x 24V)
Battery Capacity ............................................................ 12.0 Ah
Charger Input ......................................120V AC | 60 Hz | 160 W
Charger Output ........................... 26V DC | 2.2 A (each socket)
Charging Time Max ...................................................... 6 hours
No Load Speed ............................. Auger: 116 rpm to 143 rpm
Auger .................................................... 2 serrated steel blades
Clearing Width ..................................................... 24 in. (61 cm)
Depth of Snow Cut ........................................ 17.5 in. (44.5 cm)
Throw Distance Max ............................................... 40 ft (12 m)
Stages ..................................................................... Dual stage
Drive Type ........................................................... Self‑propelled
Tire ..................... 15 inch (38 cm) knobby tracassist snow tires
Tire Pressure .................................................................... 20 psi
Directional Control ................................ 180º auto‑rotate chute
Light ......................................................... Six 3 watt LED lights
Net Weight ...................................................... 147.7 lbs (67 kg)
*Generates 96V max with four 24V lithium-ion batteries. Initial no-load voltage,
per fully charged battery, peaks at 24V. Nominal voltage under typical load is
21.6V.
Unpacking

Carton Contents:

• Cordless snow blower with lower handle
• Upper handle assembly
• Discharge chute assembly
• Handle knob (4) + bolt (4)
• Chute nuts (2)
• Cord clip
• Open end wrenches (2)
• 24V iON+ lithium‑ion battery (x4)
• 24V iON+ lithium‑ion dual‑port charger (x2)
• Manual with registration card
1. Carefully remove the cordless snow blower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1‑866‑SNOWJOE (1‑866‑766‑9563).
NOTE: Do not discard the shipping carton and packaging
materials until you are ready to use the cordless snow
blower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long‑term
Drive motor: 400 W brushless
Impeller: 1200 rpm to 1522 rpm
customer service center at
®
product storage.
IMPORTANT! The equipment and packaging materials are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suffocation risk!
Battery Pack Operation
The equipment is powered by 4 lithium‑ion batteries.
The battery packs are completely sealed and maintenance
free.
m
WARNING!
The cordless snow blower can only be
powered by four of the batteries together. One battery cannot
provide sufficient power to the tool. Make sure to use four
batteries of the same voltage and the same capacity. Using the
tool with batteries of different capacities will cause damage to
the batteries.
Battery Charge Level Indicator
The battery packs are equipped with a push button for
checking the charge level. Simply press the push button to
read off the battery charge level from the LEDs of the battery
indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise, the
battery's service life will be greatly shortened.
Lights Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
NOTE: Immediately after using the battery packs, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.
USB Charging Port
Using a USB‑C charging cable (not included), plug the USB‑C
connector into the battery. Then plug the other end of the
cable into an AC adapter (not included) for charging at an
6