5.2
Operation
Instructions for the correct use of the appliance:
Never start up the appliance without having previously filled the tub, otherwise
overheating would seriously damage the machine.
Do not use more water than the maximum recommended amount.
It is recommended to insert the loaded basket in the water slowly so that the oil froth
from frying does not boil over the upper part of the tub.
It is essential that the chimney does not get blocked, even partially, for the correct
operation of the burners.
.
The steps required to optimise the operation of your pasta cooker are shown below, with all the
available options.
5.2.1
Description of the controls
CONTROL M
5.2.2
Burner ignition
Pilot ignition
Turn control M anticlockwise to the position Pilot
o
any dirt on the tub, always do so when the pasta cooker is cold, the burner
control buttons are switched to Off, and the mains power is disconnected.
Once the products have been used, carefully clean it the tub with plenty of
water.
Control M
Spark
generation unit
Control A
CONTROL A
and hold button down.
resulting
27