Kärcher BP 2 Garden Manual Del Usuario página 11

Operation
Description of the Appliance
1 Connection adapter for pumps G1
2 Stopper
3 Connection G1 (33.3 mm) suction pipe (inlet)
4 Connection G1 (33.3 mm) delivery line (output)
5 ON/OFF switch
6 Cable clip
7 Power cord with plug
8 Suction hose set* incl. 3.5 m ready for connection,
vacuum-proof spiral hose with suction filter and
backflow stop
* Included in the scope of delivery with sets only.
Preparing the Appliance
 Remove the plug.
Illustration
 Screw the connection adapter in the suction con-
nection of the pump (inlet).
Tighten manually.
 Connect the vacuum-proof suction hose.
Note
Depending on the degree of soiling of the fluid to be de-
livered, use a pre-filter (see accessories).
Note
In order to reduce the time required for suction to start
again, use a suction hose that is equipped with a back-
flow stop. This prevents the emptying of the suction
hose after use (see accessories).
Illustration
 Fill the pump with water via the delivery connection
until it is overflowing.
Illustration
 Screw the connection adapter in the delivery con-
nection of the pump (outlet).
Tighten manually.  Connect delivery line.
Operation
 Insert the mains plug into the socket.
 Switch on the appliance using the ON/OFF switch. Illustration
 In order to reduce the suction time, lift the delivery
hose approx. 1m.
 Wait till the pump sucks in and transports water uni-
formly
Note
The ON/OFF switch can also be conveniently operated
with your foot.
CAUTION
Dry running damages the pump.
 Do not leave the pump unattended during opera-
tion.
Note
The pump BP4 Garden Set is equipped
with a thermo switch, which automati-
cally switches off the pump in case of
overheating. As soon as the water in-
side the appliance has cooled down, the
appliance automatically switches back
on and can be used again.
 Switch off the appliance using the On/Off switch.
 Disconnect the main plug from the socket.
Maintenance and Care
DANGER
Turn off the appliance and remove the mains plug prior
to any care and maintenance work.
 Rinse the pump after every use if you use to trans-
port water with additives.
The appliance is maintenance free.
CAUTION
In order to prevent accidents or injuries, keep in mind
the weight of the appliance during transport (see Spec-
ifications).
When transporting by hand
 Lift appliance by the carrying handle and carry it.
CAUTION
Tripping hazard due to loose cables!
 Coil cable and secure it by means of a cable clip.
When transporting in vehicles
 Secure the appliance against shifting and tipping
over.
CAUTION
In order to prevent accidents or injuries, keep in mind
the weight of the appliance when selecting a storage lo-
cation for it (see Specifications).
Storing the Appliance
 Depressurise the appliance by opening the water
outlet connected on the delivery side (e.g. opening
the tap).  Drain hoses.
 Remove suction pipe and delivery line.
 Drain the pump via the connections suction / and
delivery line by turning it around.
 Store the appliance in a frost free area.
– 2
EN
Finish operation
Care
Maintenance
Transport
Storage
11