KALLISTA P24443 Instrucciones De Instalación página 3

INSTALLATION INSTRUCTIONS
‰ Install a temporary nipple into the shower ell.
‰ Run water through the system to flush out dirt and debris.
‰ Remove temporary nipple from the shower ell.
‰ Apply several layers of sealant tape around the straight end of the
threaded adapter.
‰ Install the threaded adapter into the supply elbow.
NOTE: A hex wrench can be used to tighten the threaded adapter.
‰ Apply several layers of sealant tape around the exposed tapered end of the threaded adapter.
‰ Install the O-ring into the back of the supply elbow.
‰ Thread the threaded adapter and supply elbow onto the shower ell.
‰ Turn on the water and allow water to flow through the supply elbow.
‰ Check connection for leaks. Repair as needed.
‰ Determine the location for the fixed wall bracket.
‰ Mark the location of the holes for the wall anchors. Drill
the holes and install the wall anchors.
‰ Attach the fixed wall bracket to the wall with the screws.
1491210-2-A
3 of 16
1. INSTALL THE SUPPLY ELBOW (P24452)
2. INSTALL THE FIXED WALL BRACKET (P24453)
Handshower, Hose
& Handshower Accessories
Shower
Ell
Apply Thread
Sealant Tape.
Drill using 5/16" bit.
Toggle Anchor
13/16"
Press and hold legs
together.
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
O-ring
Supply Elbow
Fixed Wall Bracket
Screw