FITFIU FITNESS GYM-300 FIT000203 Manual De Instrucciones página 70

STEP 7
Nº Description Qty.
55 Pin with ring 1
69 Hexagonal bolt M8*20 2
63 Flat washer Ø8 2
STEP 8
Nº Description Qty.
57 Hexagonal screw M10*75 2
60 Hexagonal screw M10*25 4
67 Nylon nut M10 4
76 Countersunk screw M6*25 4
Nº Description Qty.
59 Hexagonal bolt M10*70
64 Flat washer Ø10
70 Snap link
77 Split washer Ø10
138
STEP 9
Once the machine is assembled, check if the cable is tensioned (At the correct tension, there should be a 3-5mm gap
between the top plate and the weight stack).
If the cable is slightly loose, tighten it by tightening the bolt on the top of the weight stack.
If the cable is too loose, adjust the length of the spiral chain (#79) using the snap link (#70).
2
12
1
4
GYM-300
Loosen the
and screw the bolt
into the top plate
to give the cable
the correct tension.
Retighten the nut.
139
nut
EN