Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.
Keep other persons away. Do not let persons,
especially children, not involved in the work,
touch the tool or the extension cord and keep
them away from the work area.
5.
Store idle tools. When not in use, tools should
be stored in a dry locked-up place, out of
reach of children.
6.
Do not force the tool. It will do the job better
and safer at the rate for which it was intended.
7.
Use the right tool. Do not force small tools to
do the job of heavy duty tool. Do not use tools
for purposes not intended; for example do not
use circular saws to cut tree limbs or logs.
8.
Dress properly. Do not wear loose clothing
or jewelry, which can be caught in moving
parts. Non-skid footwear is recommended
when working outdoors. Wear protective hair
covering to contain long hair.
9.
Use protective equipment. Use safety glasses.
Use face or dust mask if working operations
create dust.
10. Connect dust extraction equipment. If the
tool is provided for the connection of dust
extraction and collecting equipment, ensure
these are connected and properly used.
11. Do not abuse the cord. Never yank the cord to
disconnect it from the socket. Keep the cord
away from heat, oil and sharp edges.
12. Secure work. Where possible use clamps or
a vice to hold the work. It is safer than using
your hand.
13. Do not overreach. Keep proper footing and
balance at all times.
14. Maintain tools with care. Keep cutting
tools sharp and clean for better and safer
performance. Follow instruction for lubricating
and
changing
cords periodically and if damaged repair by
an authorized service facility only. Inspect
extension cords periodically and replace if
damaged. Keep handles dry, clean and free
from oil and grease.
15. Disconnect tools. When not in use, before
servicing and when changing accessories such
as blades, bits and cutters, disconnect tools
from the power supply.
16. Remove adjusting keys and wrenches. Form
the habit of checking to see that keys and
adjusting wrenches are removed from the tool
before turning it on.
17. Avoid unintentional starting. Ensure switch is
in "off" position when plugging in.
8
accessories.
Inspect
18. Use outdoor extension leads. When the tool
is used outdoors, use only extension cords
intended for outdoor use and so marked.
19. Stay alert. Watch what you are doing, use
common sense and do not operate the tool
when you are tired.
20. Check damaged parts. Before further use
of tool, it should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any
other conditions that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced by an
authorized service centre unless otherwise
indicated in this instruction manual. Have
defective switches replaced by an authorized
service centre. Do not use the tool if the switch
does not turn it on and off.
21. Warning. The use of any accessory or
attachment other than one recommended in
this instruction manual may present a risk of
personal injury.
22. Have your tool repaired by a qualified
specialist. This electric tool complies with
the relevant safety rules. Repairs should only
be carried out by qualified specialist using
original spare parts otherwise this may result
in considerable danger to the user.
8.1.
ADDITIONAL SAFETY PRECAUTIONS FOR
THE MAGNETIC CORE DRILL MACHINE
1.
Always clamp the work piece securely with
safety lashing.
tool
2.
Observe the rotation direction of the core drill.
3.
Ensure that the core drill is always sharp, is
unimpeded and runs without vibration.
4.
Lift the magnetic core drill off the work piece
before the on-off switch is operated.
5.
Before drilling, allow the motor to achieve full
speed.
6.
Operate the machine only if it is properly
grounded.
7.
Do not reach into the workspace of operating
machine with your hands while the electric
power cord is connected to the socket.
8.
Protect the machine against moisture.
9.
Wear safety goggles, protective gloves, ear
protector and mask. Do not wear protective
gloves when the core drill machine is running.
EN
Tabla de contenido
