Short Description; Scope Of Delivery; Magpro 40 2S; Magpro 80 4S - Jepson MAGPRO 40 2S Instrucciones De Servicio

5. SHORT DESCRIPTION

The construction of MAGNETIC CORE DRILL
MACHINE is designed and built according to
current international standards of the machine tool
industry. The machines comply with the current
regulations for emissions and safety at work.
Please read the user instruction manual thoroughly,
particular the rules for the prevention of accidents.
Do not use tool other than the intended use as well
as cleaning and caring of the tool.
IMPORTANT
If changes to a machine are made
without authorization, null and void
and the EC conformity mark ceases to
be valid. The machine may no longer be operated.
Likewise, the guarantee and the liability of the
manufacturer are cancelled.
JEPSON Magpro 40 2s & Magpro 80 4s stand out
for:
• Easy transportation and compact
• Creating larger work space
• Simple operation
• Core drill holes through metal or none metal
materials

6. SCOPE OF DELIVERY

6.1.

MAGPRO 40 2S

• Carry case
• Lashing strap
• Coolant tank
• Tools
• Chip protection
6.2.

MAGPRO 80 4S

• Carry case
• Lashing strap
• Coolant tank
• Tools
• Chip protection
• Ejector wedge
• CM3 / Weldon 19 adapter

7. BEFORE USING THE MACHINE

BEFORE
MAGNETIC CORE DRILL MACHINE
FOR THE VERY FIRST TIME, PLEASE
READ THE INSTRUCTION MANUAL.
6
USING THE JEPSON
Always check for any visible sign of damage before
use. Follow below safety regulations to prevent
accidents and injuries.
Warning: The magnetic cord drill
machine can only be operated when
the magnet is turned on. Make sure the
tool is securely magnetized and use the
safety lashing strap to tighten the tool. Make sure
tool will fall away from operator in a situation where
tool will loose magnetic holding power and safety
lashing is unable to hold the tool in a safe position.
Warning: The magnetic clamping power
depends on the work surface. The
substrate surface paint, and any surface
coating,
smoothness affects the clamping power. If the work
surface is not metal, prepare a smooth level low
carbon steel plate at least 25 mm or 1 inch in
thickness and at least 100 mm by 200 mm in size to
ensure tool can be magnetized with good holding
power. If the work surface is a low thickness thin
metal, above mentioned metal plate must be added
under the work piece for the magnet to work
properly. The added metal plate must be secured to
prevent shifting or falling.
When coring or drilling none ferrite metals such as
aluminum or uneven surface such as corrugated
metals etc, there will be zero or minimal holding
power for the magnetic core drill machine. Special
holding device must be used else do not proceed
with any work to core or to drill.
Warning: When working above ground,
always wear safety harness to prevent
falling to prevent injuries from operator.
Always recheck tool is safely positioned
and tighten by lashing strap.
Attention: When starting the magnetic
core drill machine the oscillating
motion may cause sudden movement.
When there is power cut to the power
supply the oscillating motion may create sudden
movement. These sudden movements may create
unbalance to operator working above ground
creating danger to operator. Make sure the operator
is properly protected from falling wearing safety
harness.
and surface level
EN
of